SURFACE PREPARATION
- Clean the surface from dust, grease, oil, peeling old paint, rust, mold or moisture.
- To smoothen the surface we have already applied RUBBER STUFF, we apply slightly with a wet brush, as long putty is wet. For material saving we can in some cases to mix it with washed sand. Attention: After it dries we cannot rub it.
- The product has all the mechanical strength after 20-30 days
RESISTANCE
- In temperatures between 180 and 100oC no deterioration or crack was observed. Under application of 7atm pressure for 24hrs no leak and wetting of the material was observed. Its elasticity was measured as 539% (Dept of technical materials and elements of YPEXODE according ASTM D-412 and DIN 1048). Its resistance in solar radiations UVA and UVB is about 4years and is lengthened by far for gray color and after being painted.
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Spatula
After work clean the tools with warm water and soap. Do not empty the washing liquid into the groundwater
20 - 40 min depending on applying conditions
12 - 24 hours depending on applying conditions and the thickness
1Kg, 5Kg, 15Kg
Download the technical data sheets of the product: TDS DOWNLOAD