Εmulsion paint STEP UNMOULD is a material that solves the problem of mould. Its special composition makes it resistant to the fungi of moisture. It is recommended for both internal and external use. Especially, it is suggested for use in baths, kitchens, hospitals, schools, hotels, food industries and generally in every place that favors the growth of fungi and mould.
, 
, 
STEP UNMOULD
excellent quality unmould emulsion paint
Packaging:
750ml, 3Lt, 10Lt
Finish:
Matt
Shades:
White
Technical Information
DILUTION:
First coat: 15% water. Second coat: 5-10% water
COVERAGE:
12-16m2 / Lt per coat
DRYING:
1 – 2 hours depending on applying conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/STEP-UNMOULD-TDS-English.pdf
Application Tools
, 
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product
Stir well the product and apply on 2 coats
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the DETECTION CENTER 210 7793777.
