Waterproofing and Insulating paint for the protection of every difficult surface. It insulates and waterproofs terraces, walls etc. It can be applied on insulations of tar and asphalt, as well as on walls and concrete base. Due to its acrylic composition it has got great durability as a sealant of the solar radiation and as a great moisture sealant. Its elasticity makes it ideal for terrace insulations following the contractions-expansions of concrete, without being influenced from the environmental temperature (-18C up to 1000C there is no deterioration of the properties)
, 
, 
, 
, 
, 
MONOSTOP
waterproofing and insulating paint for roofs
Packaging:
750ml, 3Lt, 10Lt
Finish:
Matte
Shades:
Available in white and red oxide
Technical Information
DILUTION:
First coat: 10% water. Second coat without dilution
COVERAGE:
1,5 – 2m2 / Lt on properly prepared surfaces
DRYING:
2 – 3 hours depending on applying conditions. Recoat after 24 hours
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/MONOSTOP-TDS-1.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Prime the surface with Life dur solvent based undercoat and let it dry for 1 – 2 hours.
Apply a coat MONOSTOP and let it dry for 24 hours.
Apply the second coat crosswise after the first one has dried.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the material of the tools back in the box and clean immediately with warm water and soap. If material dries only with strong detergents. Do not empty washings into the groundwater.
