Elastic sealing putty with great adhesion on most surfaces. Its elasticity and sealing properties allow it to be used in many applications (rainspouts, prefabricated houses, terrace joints etc). It fills joints up to 5 cm width and 4 cm depth. It maintains its elasticity and follows the shrinkages and dilations of surfaces providing insulation too. It is recommended for plaster, concrete, wood and every inert material.
RUBBER STUFF
elastic sealing putty with great adhesion
Packaging:
1Kg, 5Kg, 15Kg
Finish:
Matt
Shades:
White and grey
Technical Information
DILUTION:
Ready to use
DRYING:
TOUCH DRYING: 20 – 40 min depending on applying conditions
COMPLETE DRYING: 12 – 24 hours depending on applying conditions and the thickness
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/RUBBER-STUFF-Τ.Π.pdf
Application Tools
SURFACE PREPARATION
Clean the surface from dust, grease, oil, peeling old paint, rust, mold or moisture.
To smoothen the surface we have already applied RUBBER STUFF, we apply slightly with a wet brush, as long putty is wet. For material saving we can in some cases to mix it with washed sand.
Attention: After it dries we cannot rub it.
The product has all the mechanical strength after 20-30 days
RESISTANCE
In temperatures between 180 and 100oC no deterioration or crack was observed. Under application of 7atm pressure for 24hrs no leak and wetting of the material was observed. Its elasticity was measured as 539% (Dept of technical materials and elements of YPEXODE according ASTM D-412 and DIN 1048). Its resistance in solar radiations UVA and UVB is about 4years and is lengthened by far for gray color and after being painted.
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
After work clean the tools with warm water and soap. Do not empty the washing liquid into the groundwater
