Quick drying anticorrosive enamel paint for chassis of vehicles and all metallic surfaces. It has excellent coverage, strong adhesion and high elasticity. It provides great protection against corrosion and petrol and also has great impact resistance. It is also suitable as undercoat for all the metallic surfaces.
, 
CHASSIS COAT
anticorrosive enamel paint for chassis
Packaging:
750ml, 2.5Lt
Finish:
Matt
Shades:
Available in White and seven shades
https://chromodomi.gr/wp-content/uploads/2025/05/Primers.pdf
Technical Information
THINNING:
1 – 5% white spirit
COVERAGE:
12-14m2 / Lt on properly prepared surfaces
DRYING:
1 – 2 hours depending on applying conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/CHASSIS-COAT-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Stir well and apply on surface.
The product ecquires all its mechanical strengths after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
