High quality undercoat with great anticorrosive properties for industrial use. It can protect every iron surface and it prepares them for the topcoat. It dries fast and is durable at high temperatures (up to 100oC). It is suitable for balusters, doors and every iron surface that needs anti-rust protection.
, 
PRIMER FAST DRYING
fast-drying anticorrosive metalic surfaces undercoat
Packaging:
3,5Lt, 16Lt
Finish:
Matt
Shades:
Available in grey and black
Technical Information
DILUTION:
10 – 15% nitro thinner
COVERAGE:
8-12m2 / Lt per coat
DRYING:
10 – 15 min depending on applying conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/PRIMER-FAST-DRYING-TDS-1.pdf
Application Tools
, 
, 
SURFACE PREPARATION
To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.
Apply the product on surface
When It dries, sand the surface with thin sandpaper and clean it, making it ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container or the container with the product. Drain well the product of the tools back in the box and clean immediately with nitro solvent. If product dries only with strong detergents. Do not empty washings into the groundwater.
