Adhesion primer from synthetic acrylic resins and hail sand (quartz). Used on glabrous or on non-absorbent surfaces in order to amplify their adhesion. After his application will be created a sharp surface, which is durable in alkaline environment. It is used for the amplification of the substrate^27s sharpness, so that the adhesion so much of the acrylic plaster and paint as much as of the plaster that follows will be enforced. The surface that is created has high resistance in alkalis and it constitutes ideal substrate suitable for internal and external use.
, 
, 
LIFE QUARTZ
acrylic quartz adhesion primer
Packaging:
1Kg, 5Kg, 15Kg
Finish:
Textured, matt
Shades:
Available in white ,in red oxide and colored in any other shade
Technical Information
THINNING:
Ready to use.
COVERAGE:
300-350gr/m2 on properly prepared surfaces
DRYING:
1 – 2 hours depending on conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/LIFE-QUARTZ-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
