Ready for use thick acrylic silicon thermal plaster with UVA & UVB filter. It is available in 4 different granulations – 1mm, 1,5mm, 2mm and 2,5mm. It is applied on all the building materials as plaster, concrete, cement boards, plasterboards etc. It is intended so much for internal as much as and external use. It can be also applied as decorative relief coat according the way of application pressed and grated. Because of his high flexibility and his excellent adhesion, is ideal as final coating in the constructions for the posterior thermal-insulation of buildings
, 
, 
, 
, 
, 
, UNCHECKTHERMOSIL
ready to use, silicon thermal plaster
Packaging:
25kg
Finish:
Textured matt
Shades:
Available in white and any shade through our color system
https://chromodomi.gr/en/color-fan-irida-1000/
https://chromodomi.gr/en/color-fan-irida-pocket-300/
https://chromodomi.gr/en/color-fan-ral-shades/
Technical Information
COVERAGE:
PRESSED WITH SPATULA 2.0mm – 2.5Kg/m²2.5mm – 3.2Kg/m²
GRATED WITH RIFFLES1.0mm – 2.1Kg/m²
1.5mm – 2.9Kg/m²
2.0mm – 3.1Kg/m²
2.5mm – 5.0Kg/m²
DRYING:
12 – 24 hours depending on applying conditions
Files
Technical data sheet
Application Tools
Surfaces must be clean and dry, without any dust, oils, mould, rust and paint residues. Stir well before use. Do not apply at temperatures below 6° C and above 40° C and at relative humidity above 80%. The product gains all its mechanical properties after 20-30 days. Clean the tools and the hands with water and soap before the plaster dries.
The product is applied without dilution. If needed diluted with water.
