Top quality emulsion masonry paint for internal use. It provides great coverage and whiteness. It produces a silk finish and it is very easy to apply. Application is usually by special roll, brush or spray gun on a clean surface. Also produces a washable surface (Class 1, EN 13300/ISO 11998) . It is ammonia free.
Certified product according to EN 71-3 (suitable for painting wooden toys that come in contact with children)
Certified according to Eurofins France and classified in the upper class A +, from the strictest global system for the evaluation of indoor emissions with reduced limitation in peptic organic compounds (LOW VOC) contributing to good indoor air quality.
, 
, 
, 
, 
, 
, 
, 
, 
, UNCHECK, UNCHECKSTEP LATEX high level
top quality emulsion masonry paint
Packaging:
180ml, 375ml, 750ml, 3Lt, 10Lt
Finish:
Matt
Shades:
SHADES: Available in white, 10 basic shades and 3 bases (P, D, TR)
https://chromodomi.gr/wp-content/uploads/2025/05/Βασικών-Bee-Lac-1.pdf
https://chromodomi.gr/en/color-fan-irida-1000/
https://chromodomi.gr/en/color-fan-irida-pocket-300/
https://chromodomi.gr/en/color-fan-ral-shades/
Technical Information
DILUTION:
First coat: 15% water. Second coat: 5-10% water
COVERAGE:
14-20m2 / Lt per coat
DRYING:
1 – 2 hours depending on applying conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/STEP-LATEX-TDS-English.pdf
Application Tools
, 
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water, Step plaster)
Stir well the product and apply on 2 coats
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the POISON CENTER 210 7793777.
