Acrylic paints for exterior use – Chromodomi https://chromodomi.gr/en/ Fri, 22 May 2026 09:51:24 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://chromodomi.gr/wp-content/uploads/2026/04/logo-chromodomi-150x150.png Acrylic paints for exterior use – Chromodomi https://chromodomi.gr/en/ 32 32 SILVER ARMOUR https://chromodomi.gr/en/product/silver-armour/ Fri, 22 May 2026 09:51:24 +0000 https://chromodomi.softways-sa.gr/?post_type=product&p=6247

Silver Armour is a high-performance water-based protective coating with excellent hiding power and solar reflectance. It contributes to reducing heat absorption and stabilizing the temperature of underlying spaces, improving overall thermal performance. Its advanced formulation provides enhanced elasticity, superior waterproofing properties, and outstanding resistance to weathering and aging. Suitable for application on bituminous membranes, terraces, and roofs, it delivers long-lasting protection, durability, and an attractive finish while helping preserve the integrity of the building structure.

]]> PPLICATION CONDITIONS

Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity is above 70% or if there is a possibility of rain or frost within the next 48 hours. Adverse conditions and failure to follow application instructions may affect the final properties of the product.

Keep tools “wet” in the container while working. Drain the product thoroughly from the tools back into the container and clean immediately with hot water and soap. If the product dries, clean only with strong detergents. Do not discharge washings into groundwater.

CAUTION: Wear protective gloves/protective clothing/personal protective equipment for the eyes/face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.

Call the Poison Control Center immediately at +30 210 7793777.

 

]]> COURT PAINT https://chromodomi.gr/en/product/court-paint-acrylic-paint-for-sport-floors/ Mon, 12 May 2025 05:10:51 +0000 https://chromodomi.softways-sa.gr/product/court-paint-acrylic-paint-for-sport-floors/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply  the recommended undercoat of product (Life dur, Life dur water)
Stir well the product and apply on 3 coats at least
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the POISON CENTER 210 7793777.

 

]]> THERMOFLEX https://chromodomi.gr/en/product/thermoflex-certified-acrylic-thermal-insulating-paint/ Fri, 09 May 2025 04:46:03 +0000 https://chromodomi.softways-sa.gr/product/thermoflex-certified-acrylic-thermal-insulating-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Life dur, Life dur water)
Stir well the product and apply on 2 coats
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

 

 

]]> LIFE RELIEF https://chromodomi.gr/en/product/life-relief-acrylic-textured-coating/ Fri, 09 May 2025 04:44:13 +0000 https://chromodomi.softways-sa.gr/product/life-relief-acrylic-textured-coating/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Life dur, Life dur water)
Stir well the product and apply on 2 coats with special RELIEF roll
The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

]]> BOLERO ACRYL https://chromodomi.gr/en/product/bolero-acryl-excellent-quality-acrylic-cement-paint/ Fri, 09 May 2025 04:39:50 +0000 https://chromodomi.softways-sa.gr/product/bolero-acryl-excellent-quality-acrylic-cement-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Life dur, Life dur water)
Stir well the product and apply on 2 coats
The product has all the mechanical strength after 20-30 days
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

]]> LIFE ACRYL ELASTIC FIBER https://chromodomi.gr/en/product/life-acryl-elastic-fiber-100-acrylic-fiber-reinforced-elastomeric-cement-paint/ Thu, 08 May 2025 11:06:33 +0000 https://chromodomi.softways-sa.gr/product/life-acryl-elastic-fiber-100-acrylic-fiber-reinforced-elastomeric-cement-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Life dur, Life dur water)
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

 

]]> VELVET ACRYL https://chromodomi.gr/en/product/velvet-acryl-economic-acrylic-cement-paint-high-coverage/ Thu, 08 May 2025 11:01:23 +0000 https://chromodomi.softways-sa.gr/product/velvet-acryl-economic-acrylic-cement-paint-high-coverage/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Life dur, Life dur water)
Stir well the product and apply on 2 coats
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

]]> COVER SIL https://chromodomi.gr/en/product/cover-sil-silicon-paint-for-exterior-use/ Thu, 08 May 2025 08:51:40 +0000 https://chromodomi.softways-sa.gr/product/cover-sil-silicon-paint-for-exterior-use/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product: Life dur water- Stir well the product and apply on 2 coats

APPLICATION CONDITIONS

Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.

 

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.

Call immediately the POISON CENTER 210 7793777

 

]]> MONOFLEX https://chromodomi.gr/en/product/monoflex-acrylic-insulating-material-for-vertical-surfaces/ Thu, 08 May 2025 08:43:45 +0000 https://chromodomi.softways-sa.gr/product/monoflex-acrylic-insulating-material-for-vertical-surfaces/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Stir well the product and apply on 2 coats
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

]]> STEP ACRYL W.S. https://chromodomi.gr/en/product/step-acryl-w-s-solvent-based-acrylic-cement-paint/ Thu, 08 May 2025 08:42:10 +0000 https://chromodomi.softways-sa.gr/product/step-acryl-w-s-solvent-based-acrylic-cement-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Life dur)
Stir well the product and apply on 2 coats
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

/During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

]]>