Emulsion paints for interior use – Chromodomi https://chromodomi.gr/en/ Mon, 06 Jul 2026 11:43:59 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://chromodomi.gr/wp-content/uploads/2026/04/logo-chromodomi-150x150.png Emulsion paints for interior use – Chromodomi https://chromodomi.gr/en/ 32 32 COVER LATEX READY https://chromodomi.gr/en/product/cover-latex-ready/ Tue, 16 Jun 2026 08:34:26 +0000 https://chromodomi.gr/product/cover-latex-ready/ SURFACE PREPARATION
– To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oil, peeling old paint, rust, mold, or moisture.
– Apply the product in 2 coats (after stirring it thoroughly), allowing 1–2 hours between coats.

APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity exceeds 70%, or if there is a chance of rain or frost in the next 48 hours.
Adverse conditions and failure to follow application instructions may affect the final properties of the product. Keep tools “wet” in the container while working. Thoroughly rinse the product from the tools and clean them immediately with hot water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of wash water into the groundwater.
CAUTION: Wear protective gloves / protective clothing / personal protective equipment for the eyes / face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.
Call the POISON CONTROL CENTER immediately at 210 7793777

]]> STEP READY https://chromodomi.gr/en/product/step-ready-2/ Tue, 16 Jun 2026 07:50:36 +0000 https://chromodomi.gr/product/step-ready-2/ (Class 1), in accordance with EN 13300 / ISO 11998, and is ammonia-free. Certified product in accordance with EN 71-3, suitable for painting wooden toys that come into contact with children. Certified by Eurofins France and classified in the highest class A+, in accordance with one of the world’s most stringent indoor emissions rating systems. Thanks to its low VOC content, it contributes to good indoor air quality.]]> SURFACE PREPARATION
– To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oil, peeling old paint, rust, mold, or moisture.
– Apply the product in 2 coats (after stirring it thoroughly), allowing 1–2 hours between coats.

APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity exceeds 70%, or if there is a chance of rain or frost in the next 48 hours.
Adverse conditions and failure to follow application instructions may affect the final properties of the product. Keep tools “wet” in the container while working. Thoroughly rinse the product from the tools and clean them immediately with hot water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of wash water into the groundwater.
CAUTION: Wear protective gloves / protective clothing / personal protective equipment for the eyes / face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.
Call the POISON CONTROL CENTER immediately at 210 7793777

]]> STEP LATEX SUPER MATT https://chromodomi.gr/en/product/step-latex-super-matt/ Fri, 11 Jul 2025 11:56:34 +0000 https://chromodomi.softways-sa.gr/?post_type=product&p=5381 SURFACE PREPARATION

To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water, Step plaster)
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the POISON CENTER +30 210 7793777.

]]> HYDROCHROMA ULTRA https://chromodomi.gr/en/product/ydrochroma-ultra-extra-white-paint-for-internal-ceilings/ Mon, 12 May 2025 05:06:40 +0000 https://chromodomi.softways-sa.gr/product/ydrochroma-ultra-extra-white-paint-for-internal-ceilings/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

 

]]> STEP LATEX high level https://chromodomi.gr/en/product/step-latex-high-level-top-quality-emulsion-masonry-paint/ Mon, 12 May 2025 04:58:25 +0000 https://chromodomi.softways-sa.gr/product/step-latex-high-level-top-quality-emulsion-masonry-paint/ SURFACE PREPARATION

To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water, Step plaster)
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the POISON CENTER 210 7793777.

 

 

 

]]> UNMOULD HYDROCHROMA https://chromodomi.gr/en/product/unmould-hydrochroma-extra-white-paint-for-internal-ceilings/ Fri, 09 May 2025 09:51:26 +0000 https://chromodomi.softways-sa.gr/product/unmould-hydrochroma-extra-white-paint-for-internal-ceilings/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

]]> VELVET LATEX https://chromodomi.gr/en/product/velvet-latex-economic-emulsion-paint-high-coverage/ Fri, 09 May 2025 04:47:37 +0000 https://chromodomi.softways-sa.gr/product/velvet-latex-economic-emulsion-paint-high-coverage/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water, Step plaster)
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the DETECTION CENTER 210 7793777.

 

 

 

]]> BOLERO LATEX https://chromodomi.gr/en/product/emulsion-paint-high-quality-emulsion-paint/ Fri, 09 May 2025 04:41:38 +0000 https://chromodomi.softways-sa.gr/product/emulsion-paint-high-quality-emulsion-paint/ SURFACE PREPARATION

To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water, Step plaster)
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the DETECTION CENTER 210 7793777.

 

 

]]> STEP THERMOLIFE https://chromodomi.gr/en/product/thermolife-top-quality-insulating-emulsion-paint/ Thu, 08 May 2025 11:05:46 +0000 https://chromodomi.softways-sa.gr/product/thermolife-top-quality-insulating-emulsion-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.- For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water, Step plaster)- Stir well the product and apply on 2 coatsRECOMMENDED PRIMERSFor new or pore surfaces, first apply the recommended primers of the product: Step Primer, Life dur Water, Step PlasterAPPLICATION CONDITIONSAvoid applying the product at temperatures below 6°C and above 35°C and when the relative humidity is above 70% or if there is a possibility of rain or frost in the next 48 hours.Adverse conditions and not following the application instructions may alter the final properties of the product.APPLICATION TOOLS- Brush- Roller- Spray gunDuring working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.WARNING: Wear protective gloves/protective clothing/personal protective equipment for eyes/face.In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if possible. Continue to rinse.
Call immediately the POISON CENTER 210 7793777.

]]> HYDROCHROMA https://chromodomi.gr/en/product/ydrochroma-extra-white-paint-for-internal-ceilings/ Thu, 08 May 2025 08:33:16 +0000 https://chromodomi.softways-sa.gr/product/ydrochroma-extra-white-paint-for-internal-ceilings/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
For new or porous surfaces apply first the recommended undercoat of product (Step primer, Life dur water)
Stir well the product and apply on 2 coats

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

]]>