Enamel paints – Chromodomi https://chromodomi.gr/en/ Fri, 22 May 2026 09:47:06 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://chromodomi.gr/wp-content/uploads/2026/04/logo-chromodomi-150x150.png Enamel paints – Chromodomi https://chromodomi.gr/en/ 32 32 HI-TEMP 650 https://chromodomi.gr/en/product/hi-temp-silikonoucho-chroma-ypsilis-thermokrasias/ Fri, 24 Apr 2026 08:24:42 +0000 https://chromodomi.softways-sa.gr/?post_type=product&p=6022 SURFACE PREPARATION

To ensure proper adhesion of the product, surfaces must be clean, dry, and free of all defective and poorly adhered materials, dust, grease, oil, rust, mold, or moisture, etc.

Stir the product thoroughly and apply in 2 coats

APPLICATION CONDITIONS

Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity is above 70% or if there is a possibility of rain or frost within the next 48 hours. Adverse conditions and failure to follow application instructions may affect the final properties of the product.

Keep tools “wet” in the container while working. Drain the product thoroughly from the tools back into the container and clean immediately with hot water and soap. If the product dries, clean only with strong detergents. Do not discharge washings into groundwater.

CAUTION: Wear protective gloves/protective clothing/personal protective equipment for the eyes/face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.

Call the Poison Control Center immediately at +30 210 7793777.

 

 

]]> BEELAC https://chromodomi.gr/en/product/beelac-water-based-beehive-paint/ Mon, 12 May 2025 05:07:38 +0000 https://chromodomi.softways-sa.gr/product/beelac-water-based-beehive-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product (Velatura water)
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

]]> TILE PAINT WATER https://chromodomi.gr/en/product/tile-paint-water-water-based-paint-for-bathroom-kitchen-wall-tiles/ Fri, 09 May 2025 05:14:32 +0000 https://chromodomi.softways-sa.gr/product/tile-paint-water-water-based-paint-for-bathroom-kitchen-wall-tiles/ SURFACE PREPARATION
To ensure proper adhesion of the product the surface must be cleaned of dust, grease, oil, peeled old paint, rust, mold or moisture residue.
Apply the product directly on the surface
Clean with a mild cleaner 5 days after the completion of the painting
The product acquires all its mechanical strength after 20 – 30 days.
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6 ° C and above 40 ° C and when the relative humidity is greater than 80%. Adverse conditions during application may alter the final properties of the product.
Keep the tools “wet” in the container during the work. Drain the product well from the tools and clean them with water. If the product dries, leave only with strong detergents. Do not empty the washing liquids into the aquifer.

 

 

 

 

]]> SUPER HARD https://chromodomi.gr/en/product/super-hard-hardener-for-alkyd-based-enamel-paints/ Fri, 09 May 2025 05:05:52 +0000 https://chromodomi.softways-sa.gr/product/super-hard-hardener-for-alkyd-based-enamel-paints/ For application with brush or roller, add product in paint at 10 – 20%
For application with spray gun, add product in paint at 30 –  40%
After addition of the product, dilution of the mixture with solvent is not required

NOTES

Do not add more SUPER HARD than it is recommended. The forming film will be harder but also more fragile. The coating must be consumed in 8 hours after addition. In any other case the coating will gel in the container.

]]> RADIATOR https://chromodomi.gr/en/product/radiator-gloss-enamel-paint-for-radiators/ Fri, 09 May 2025 04:55:16 +0000 https://chromodomi.softways-sa.gr/product/radiator-gloss-enamel-paint-for-radiators/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

 

]]> HEATLAC https://chromodomi.gr/en/product/heatlac-heat-resistant-enamel-paint/ Fri, 09 May 2025 04:53:41 +0000 https://chromodomi.softways-sa.gr/product/heatlac-heat-resistant-enamel-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product (Primer, Chassis coat, Velatura)
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

]]> BLACKBOARD PAINT https://chromodomi.gr/en/product/blackboard-paint-water-based-velvet-flat-acrylic-paint/ Fri, 09 May 2025 04:52:07 +0000 https://chromodomi.softways-sa.gr/product/blackboard-paint-water-based-velvet-flat-acrylic-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Stir well the product and apply on surface 2 coats.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

]]> ALUMINIUM https://chromodomi.gr/en/product/aluminium-special-heat-resistant-aluminium-paint/ Fri, 09 May 2025 04:46:50 +0000 https://chromodomi.softways-sa.gr/product/aluminium-special-heat-resistant-aluminium-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product (Primer, Chassis coat, Velatura)
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

]]> MOTOR LAC https://chromodomi.gr/en/product/motor-lac-fast-drying-synthetic-enamel-paint/ Thu, 08 May 2025 13:03:56 +0000 https://chromodomi.softways-sa.gr/product/motor-lac-fast-drying-synthetic-enamel-paint/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6 ° C and above 40 ° C and when the relative humidity is greater than 80%. Adverse conditions during application may alter the final properties of the product.
Keep the tools “wet” in the container during the work. Drain the product well from the tools and clean them with water. If the product dries, leave only with strong detergents. Do not empty the washing liquids into the aquifer.

 

 

 

 

]]> STEP LAC WATER MATT https://chromodomi.gr/en/product/step-lac-water-matt-water-based-enamel-paint-for-metal-wood/ Thu, 08 May 2025 11:09:07 +0000 https://chromodomi.softways-sa.gr/product/step-lac-water-matt-water-based-enamel-paint-for-metal-wood/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product (Velatura water)
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

 

]]>