Surface preparation & Application – Chromodomi https://chromodomi.gr/en/ Fri, 22 May 2026 09:55:08 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://chromodomi.gr/wp-content/uploads/2026/04/logo-chromodomi-150x150.png Surface preparation & Application – Chromodomi https://chromodomi.gr/en/ 32 32 PRIME FORCE 4+1 https://chromodomi.gr/en/product/prime-force-41/ Fri, 22 May 2026 09:54:20 +0000 https://chromodomi.softways-sa.gr/?post_type=product&p=6250

High-performance water-based primer designed for demanding applications. It offers outstanding adhesion to challenging surfaces, including galvanized steel, glass, PVC, copper, and aluminum, ensuring excellent substrate preparation and long-lasting coating performance.

]]> APPLICATION CONDITIONS

Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity is above 70% or if there is a possibility of rain or frost within the next 48 hours. Adverse conditions and failure to follow application instructions may affect the final properties of the product.

Keep tools “wet” in the container while working. Drain the product thoroughly from the tools back into the container and clean immediately with hot water and soap. If the product dries, clean only with strong detergents. Do not discharge washings into groundwater.

CAUTION: Wear protective gloves/protective clothing/personal protective equipment for the eyes/face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.

Call the Poison Control Center immediately at +30 210 7793777.

]]> SL-10 https://chromodomi.gr/en/product/sl-10-water-repelling-with-silicone-based-without-solvents/ Mon, 12 May 2025 05:35:24 +0000 https://chromodomi.softways-sa.gr/product/sl-10-water-repelling-with-silicone-based-without-solvents/ Surfaces where product is going to be applied should have open pores and be clean.- For horizontal surfaces (absorbent tiles, mosaic, etc.) the application can be done with a squeegee. The material is left to act for 5 minutes, next the excessive material is removed. Clean the surface with a slightly wet cloth. The final cleaning of the surface can be done after 6 hours.- In vertical surfaces product is applied by spray, brush or roller at 1-2 coats. The second coat follows while the first is still fresh. The application of product for waterproofing tile joints can be done by brush or squeegee.

]]> POLY-THINNER https://chromodomi.gr/en/product/poly-thinner-polyourethane-thinner-slow/ Fri, 09 May 2025 09:47:03 +0000 https://chromodomi.softways-sa.gr/product/poly-thinner-polyourethane-thinner-slow/ HAZARDS STATEMENTS

Η225: Highly flammable liquid and vapour
Η312: Harmful in contact with skin
Η332: Harmful if inhaled
Η315: Causes skin irritation
Η319: Causes serious eye irritation

PRECAUTIONARY STATEMENTS

P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking
Ρ261: Avoid breathing fume and spray
Ρ271: Use only outdoors or in a well-ventilated area
P280: Wear protective gloves/protective clothing/eye protection/face protection
P312: Call a POISON CENTER or doctor/physician if you feel unwell
P501: Dispose of contents/container according to local and national regulations. CONTAINS: Xylene.
DANGER

]]> XYLOFINE https://chromodomi.gr/en/product/xylofine-water-based-wood-putty-ideal-repairing-defects-on-wooden-surfaces/ Fri, 09 May 2025 04:51:12 +0000 https://chromodomi.softways-sa.gr/product/xylofine-water-based-wood-putty-ideal-repairing-defects-on-wooden-surfaces/ SURFACE PREPARATION
Clean the surface from dust, grease, oil, peeling old paint, rust, mold or moisture.
Apply the putty at the desired point with spatula.
For repairing deep defects, apply more than once.
If the putty is hard, thin with water or alcohol.
Xylofine can be filled, drilled, planed, sawed, turned and sanded very easily.
After use, keep the can tightly closed.
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
After work clean the tools with warm water and soap. Do not empty the washing liquid into the groundwater

 

 

]]> CRYSTAL GLUE https://chromodomi.gr/en/product/crystal-glue-glue-for-every-type-of-wood/ Fri, 09 May 2025 04:49:18 +0000 https://chromodomi.softways-sa.gr/product/crystal-glue-glue-for-every-type-of-wood/ SURFACE PREPARATION
Clean the surface from dust, grease, oil, peeling old paint, rust, mold or moisture.
Surfaces must be clean. Usually CHROMOKOL is applied in one of the two surfaces by brush, roller, spatula etc. Afterwards the surfaces get into contact by a common or hydraulic press. Pressing time depends on the temperature and the relative humidity of the environment, the type and the moisture of wood and the mode of pressing. Ideal temperature 25-30 C. After use the container must be closed firmly and the tools cleaned with water before dry.
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
After work clean the tools with warm water and soap. Do not empty the washing liquid into the groundwater

 

 

 

]]> PUTTY ACRYLIC https://chromodomi.gr/en/product/putty-acrylic-ideal-for-stuccoing-of-walls-wood-concrete-etc/ Fri, 09 May 2025 04:43:27 +0000 https://chromodomi.softways-sa.gr/product/putty-acrylic-ideal-for-stuccoing-of-walls-wood-concrete-etc/ SURFACE PREPARATION
Clean the surface from dust, grease, oil, peeling old paint, rust, mold or moisture.
Apply the putty at the desired point with spatula.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
After work clean the tools with warm water and soap. Do not empty the washing liquid into the groundwater

 

]]> ΜΟΝΟ SMOKE – WATER https://chromodomi.gr/en/product/mono-smoke-water-based-water-based-stain-block-undercoat/ Thu, 08 May 2025 13:00:27 +0000 https://chromodomi.softways-sa.gr/product/mono-smoke-water-based-water-based-stain-block-undercoat/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

 

]]> WHITE SPIRIT https://chromodomi.gr/en/product/white-spirit-2/ Thu, 08 May 2025 11:07:20 +0000 https://chromodomi.softways-sa.gr/product/white-spirit-2/ HAZARD STATEMENTS

H226: Flammable liquid and vapour.
H336: May cause drowsiness or dizziness.
H304: May be fatal if swallowed and enters airways.
H411: Toxic to aquatic life with long lasting effects.

PRECAUTION STATEMENTS

Ρ102: Keep out of reach of children.
P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ρ261: Avoid breathing dust/fume/gas/mist/vapours/spray.
Ρ271: Use only outdoors or in a well-ventilated area.
Ρ273: Avoid release to the environment.
Ρ280: Wear protective gloves/protective clothing/eye protection/face protection.
P331: Do NOT induce vomiting.
Ρ301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
Ρ304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ρ403+Ρ235: Store in a well-ventilated place. Keep cool.
CONTAINS: Naphtha (petroleum), hydrodesulfurized heavy.

EINECS NR 265-185-4
CAS NR 64742-82-1
DANGER

 

]]> RUST STABILIZER https://chromodomi.gr/en/product/rust-stabilizer/ Thu, 08 May 2025 11:02:15 +0000 https://chromodomi.softways-sa.gr/product/rust-stabilizer/ SURFACE PREPARATION
To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.
Apply the product on surface without dilution by roller or brush.
Stabilization of rust and changing of color is completed within 2-3 hours. After that we can apply on surface anticorrosive undercoat or final paint.
The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

]]> PRIMER-W https://chromodomi.gr/en/product/primer-w-water-based-anticorrosive-undercoat-for-metallic-surfaces/ Thu, 08 May 2025 11:00:31 +0000 https://chromodomi.softways-sa.gr/product/primer-w-water-based-anticorrosive-undercoat-for-metallic-surfaces/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 1 – 2 hours.
Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

]]>