Undercoats | Primers – Chromodomi https://chromodomi.gr/en/ Fri, 22 May 2026 09:55:08 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://chromodomi.gr/wp-content/uploads/2026/04/logo-chromodomi-150x150.png Undercoats | Primers – Chromodomi https://chromodomi.gr/en/ 32 32 PRIME FORCE 4+1 https://chromodomi.gr/en/product/prime-force-41/ Fri, 22 May 2026 09:54:20 +0000 https://chromodomi.softways-sa.gr/?post_type=product&p=6250

High-performance water-based primer designed for demanding applications. It offers outstanding adhesion to challenging surfaces, including galvanized steel, glass, PVC, copper, and aluminum, ensuring excellent substrate preparation and long-lasting coating performance.

]]> APPLICATION CONDITIONS

Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity is above 70% or if there is a possibility of rain or frost within the next 48 hours. Adverse conditions and failure to follow application instructions may affect the final properties of the product.

Keep tools “wet” in the container while working. Drain the product thoroughly from the tools back into the container and clean immediately with hot water and soap. If the product dries, clean only with strong detergents. Do not discharge washings into groundwater.

CAUTION: Wear protective gloves/protective clothing/personal protective equipment for the eyes/face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.

Call the Poison Control Center immediately at +30 210 7793777.

]]> ΜΟΝΟ SMOKE – WATER https://chromodomi.gr/en/product/mono-smoke-water-based-water-based-stain-block-undercoat/ Thu, 08 May 2025 13:00:27 +0000 https://chromodomi.softways-sa.gr/product/mono-smoke-water-based-water-based-stain-block-undercoat/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

 

]]> RUST STABILIZER https://chromodomi.gr/en/product/rust-stabilizer/ Thu, 08 May 2025 11:02:15 +0000 https://chromodomi.softways-sa.gr/product/rust-stabilizer/ SURFACE PREPARATION
To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.
Apply the product on surface without dilution by roller or brush.
Stabilization of rust and changing of color is completed within 2-3 hours. After that we can apply on surface anticorrosive undercoat or final paint.
The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

 

]]> PRIMER-W https://chromodomi.gr/en/product/primer-w-water-based-anticorrosive-undercoat-for-metallic-surfaces/ Thu, 08 May 2025 11:00:31 +0000 https://chromodomi.softways-sa.gr/product/primer-w-water-based-anticorrosive-undercoat-for-metallic-surfaces/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 1 – 2 hours.
Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

]]> STEP PLASTER PRIMER https://chromodomi.gr/en/product/step-plaster-primer-plasterboard-undercoat/ Thu, 08 May 2025 09:51:35 +0000 https://chromodomi.softways-sa.gr/product/step-plaster-primer-plasterboard-undercoat/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

]]> PRIMER FOR GALVANIZED SURFACES https://chromodomi.gr/en/product/primer-for-galvanized-surfaces-special-product-with-very-good-adhesion-on-non-ferrous-surfaces/ Thu, 08 May 2025 09:50:02 +0000 https://chromodomi.softways-sa.gr/product/primer-for-galvanized-surfaces-special-product-with-very-good-adhesion-on-non-ferrous-surfaces/ SURFACE PREPARATION
To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.
For new, freshly galvanized surfaces require good scrubbing.
After surface preparation apply one coat of primer galvanized.
When it dries,we sand and clean the surface making it ready for the topcoat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container or the container with the product. Drain well the product of the tools back in the box and clean immediately with nitro solvent. If product dries only with strong detergents. Do not empty washings into the groundwater

]]> ZINC PRIMER https://chromodomi.gr/en/product/zinc-primer-anticorrosive-undercoat-with-phosphoric-zinc-ions/ Thu, 08 May 2025 09:12:39 +0000 https://chromodomi.softways-sa.gr/product/zinc-primer-anticorrosive-undercoat-with-phosphoric-zinc-ions/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 20 – 40 min.
Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

]]> VELATURA-WATER https://chromodomi.gr/en/product/velatura-water-based-water-based-undercoat-for-enamel-paints/ Thu, 08 May 2025 09:11:43 +0000 https://chromodomi.softways-sa.gr/product/velatura-water-based-water-based-undercoat-for-enamel-paints/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

]]> LIFE QUARTZ https://chromodomi.gr/en/product/life-quartz-acrylic-quartz-adhesion-primer/ Thu, 08 May 2025 09:10:53 +0000 https://chromodomi.softways-sa.gr/product/life-quartz-acrylic-quartz-adhesion-primer/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

 

]]> LIFE DUR SILICON WATER https://chromodomi.gr/en/product/life-dur-silicon-water-silicon-water-based-primer/ Thu, 08 May 2025 09:04:33 +0000 https://chromodomi.softways-sa.gr/product/life-dur-silicon-water-silicon-water-based-primer/ SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

]]>