CLEANING MATERIALS – Chromodomi

F-18 Μarble/mosaic floors cleaner

softways — Thu, 08 May 2025 09:43:38 +0000

APPLICATION

Apply the product on surface and leave to work for 2-3 minutes. The cleaning action is reinforced mechanically , mop up the surface . All surfaces which been cleaned, rinsed with plenty of water.

PACKAGES

It is delivered in plastic containers of 500ml, 1Lt, 4Lt

TECHNICAL DATA SHEETS & NOTES

Download the technical data sheets of the product: TDS DOWNLOAD

F-17 Cleaner for fireplaces & barbeque

softways — Thu, 08 May 2025 09:40:34 +0000

APPLICATION

Is used as such. Spray the surface and leave the product to work for 5-10 minutes. Then abrade with a brush or sponge and flush with plenty of water using a sponge. On surfaces with stubborn dirt repeat the process.

PACKAGES

It is delivered in plastic containers of 500ml, 1Lt, 4Lt

TECHNICAL DATA SHEETS & NOTES

download the technical data sheets of the product: TDS DOWNLOAD

F-31 Mould Cleaner

softways — Fri, 09 May 2025 05:01:48 +0000

The product is used AS-IS- Remove with spatula or sponge the thick layers of mold or algae.- Spray from a 10-15 cm distance and leave the product to work for approximately 15 minutes.
Repeat after 15 minutes for another 2-3 times in order to infuse the product well to the surface. Let it dry. Wipe the surface with a sponge or with a slightly damp paper towel.

F-24 BETOCLEAN

softways — Fri, 09 May 2025 04:57:41 +0000

Attention. The underfloor heating must be switched off 12 hours before the application.Before the application must be wetted substrate.- Depending on the hardness and type of soiling the product F-24 BETON CLEAN used as such or diluted with water in a ratio of 1:5 and applied to the surface.
Use a brush, by hand or mechanically until dissolved dirt. DO NOT LET IT DRY. After cleaning removes residual dirt with sponge or with water absorber. Let it dry. On absorbent substrates such as natural stone, concrete, etc. recommended to apply a appropriate protective product, In combination with the cleaning and drying the substrate.- In construction tools, concrete mixers, construction tools (shovel, trowel, etc.) cleaning is done by hand by dipping in an aqueous solution of 1 part F-24 BETON CLEAN with 3-5 parts water and leave for 4-6 hours End Rinse thoroughly with clean water.
DO NOT USE FOR sensitive to acids tiles and slabs, polished natural stone, enamel, concrete, etc. Materials such as aluminum, chromium, iron, inox must be covered or moved before application. Ventilation required. Before applying, it is recommended that is tested.

F-19 Salt cleaner

softways — Fri, 09 May 2025 04:52:54 +0000

s used as such. Spray the surface and leave the product to work for 2-3 minutes. The cleaning action is reinforced mechanically , mop up the surface. All surfaces which been cleaned, rinsed with plenty of water.
ATTENTION:
Enamel surfaces used in very diluted and for a short time. For chrome consult the manufacturer^27s instructions
DO NOT USE ON MARBLE AND MOSAIC SURFACES

LAVAMANI

softways — Thu, 08 May 2025 13:01:18 +0000

Put a small amount of the product on dry hands. Clean with the cream and rinse.
Caution! Do not use the product on sensitive areas and avoid eye contact. Avoid very frequent and inappropriate use of the product. Keep away from children. External use.
In case of contact with eyes, rinse thoroughly with plenty of water for several minutes. If there are contact lenses, remove them if they are easy. Keep rinsing.
Immediately call the POISON CENTER or your doctor