Enamel paint with a special synthetic resin base. It protects, decorates and provides to the painted surface the appearance of forged metal. Suitable for painting metal surfaces, appliances and machinery. It shows strong adhesion and dries quickly.
, 
MARTELE
hammer effect paint
Packaging:
750ml, 2.5Lt
Finish:
Gloss hammer effet
Shades:
Available in 12 shades of our colourcard
https://chromodomi.gr/wp-content/uploads/2025/05/Metal-Surfaces_.pdf
Technical Information
DILUTION:
2 – 5% Νitro thinner
COVERAGE:
8-10m2 / Lt on properly prepared surfaces
DRYING:
30 min depending on applying conditions
Files
Technical Data Sheet
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product (Primer)
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
