White water based acrylic sealant for the hiding and the isolation of surfaces that “add” stains to the final coat. It isolates smoke, nicotine, old moisture, mould etc. After applying mono smoke water we can paint with every emulsion paint or synthetic enamel without having stain problems in the final coating.
, 
, 
ΜΟΝΟ SMOKE – WATER
water based stain block undercoat
Packaging:
750ml, 2.5Lt
Finish:
Matt
Shades:
Available in white
Technical Information
THINNING:
5 – 10% water
COVERAGE:
15-20m2 / Lt on properly prepared surfaces
DRYING:
30min depending on conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/MONOSMOKE-W-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
