Micronized clear acrylic water based primer for walls, with high penetration for internal and external use. It is the most suitable material for priming of surfaces that are to be painted with acrylic or emulsion paints. Additionally, it has got great adhesion on the wall. Ideal for use on gypsum board, plaster, cardboard, spatula treated surfaces etc. It reinforces the adhesion of acrylic and enamel paints and reduces their consumption. It is odorless, friendly to environment and the user and it is recommended for interior use. Due to its acrylic composition it can be used without a problem on exterior walls, too.
, 
LIFE DUR WATER
micronized acrylic water based primer
Packaging:
1Lt, 5Lt, 10Lt, 16Lt
Finish:
Matt
Shades:
Transparent
Technical Information
THINNING:
50 – 100% water
COVERAGE:
15-20m2 / Lt on properly prepared surfaces
DRYING:
1 – 2 hours depending on conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/LIFE-DUR-WATER-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
