High quality undercoat with great anticorrosive properties. It can protect every iron surface and prepare it for the topcoat. The mechanism of protection is based on phosphoric zinc ions activity. It is applied on surfaces, where we want absolutely protection and great resistance.
, 
ZINC PRIMER
anticorrosive undercoat with phosphoric zinc ions
Packaging:
750ml, 2.5Lt
Finish:
Matt
Shades:
Available in grey
https://chromodomi.gr/wp-content/uploads/2025/05/Primers.pdf
Technical Information
THINNING:
1 – 5% White spirit
COVERAGE:
10-12m2 / Lt on properly prepared surfaces
DRYING:
20 – 40 mins depending on the conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/ZINC-PRIMER-TDS-EN.pdf
Application Tools
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 20 – 40 min.
Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
