Water based undercoat for all interior and exterior wood surfaces. It is applied easily and provides great coverage and high adhesion. It is almost odourless and easy to use.
, 
VELATURA-WATER
water based undercoat for enamel paints
Packaging:
750ml, 2.5Lt
Finish:
Matt
Shades:
Available in white
Technical Information
THINNING:
5 – 10% water
COVERAGE:
12-15m2 / Lt on properly prepared surfaces
DRYING:
1 – 2 hours depending on conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/VELATURA-W-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
