Special water based product for stabilizing and convert the rust. Reacts chemically with rust converting it to inert iron and prevents its re-creation. Offer high adhesion and high class protection. The effect of the product is evident by the color change of the rusty surface.
NEW COMPOSITION!
, 
Technical Information
THINNING:
Ready to use
COVERAGE:
6-8m2 / Lt on properly prepared surfaces
DRYING:
2 – 3 hours depending on applying conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/RUST-STABILIZER-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.
Apply the product on surface without dilution by roller or brush.
Stabilization of rust and changing of color is completed within 2-3 hours. After that we can apply on surface anticorrosive undercoat or final paint.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
