High-temperature silicone-based paint for surfaces exposed to temperatures up to 650°C, such as chimneys, firebricks, boilers, stoves, exhaust pipes, engines, etc. It has excellent adhesion, dries quickly, and provides long-lasting protection. Suitable for indoor and outdoor use.
NEW!
, 
, 
, 
HI-TEMP 650
high-temperature silicone-based paint
Packaging:
0,75lt , 2,5lt
Finish:
Metallic gloss
Shades:
Metallic dark grey
Technical Information
DILUTION:
Ready to use
COVERAGE:
14m2
DRYING:
Dries instantly on the surface.
Complete drying: 24 hours depending on conditions
Files
Application Tools
, 
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry, and free of all defective and poorly adhered materials, dust, grease, oil, rust, mold, or moisture, etc.
Stir the product thoroughly and apply in 2 coats
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6°C and above 35°C, and when relative humidity is above 70% or if there is a possibility of rain or frost within the next 48 hours. Adverse conditions and failure to follow application instructions may affect the final properties of the product.
Keep tools “wet” in the container while working. Drain the product thoroughly from the tools back into the container and clean immediately with hot water and soap. If the product dries, clean only with strong detergents. Do not discharge washings into groundwater.
CAUTION: Wear protective gloves/protective clothing/personal protective equipment for the eyes/face. In case of contact with the eyes, rinse thoroughly with plenty of water for several minutes. If wearing contact lenses, remove them if possible. Continue rinsing.
Call the Poison Control Center immediately at +30 210 7793777.
