Transparent silicon water based primer for walls with great adhesion and high penetration for internal and external use. It is the most suitable material for priming of surfaces that are to be painted with silicon based acrylic or emulsion paints. It allows the wall to “breathe” taking out the moisture, but prohibiting it to penetrate. It must be used only on new surfaces, or on those that are painted with silicon based paint, because it losses the property of breathing, if it is applied on traditional paints.
, 
, 
LIFE DUR SILICON WATER
silicon water based primer
Packaging:
1Lt, 5Lt
Finish:
Matt
Shades:
Transparent
Technical Information
THINNING:
50 – 100% water
COVERAGE:
15-20m2 / Lt on properly prepared surfaces
DRYING:
1 – 2 hours depending on conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/LIFE-DUR-SILICON-WATER-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush or roll and let it dry for 1 – 2 hours.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
