White acrylic sealant for the hiding and the isolation of surfaces that “add” stains to the final coat. It isolates smoke, nicotine, old moisture, mold etc. After applying we can paint with every emulsion paint or synthetic enamel without having stain problems in the final coating.
MONO SMOKE
solvent based stain block undercoat
Packaging:
750ml, 2.5Lt
Finish:
Matt
Shades:
White
Technical Information
THINNING:
1 – 5% White Spirit
COVERAGE:
10-15m2 / Lt on properly prepared surfaces
DRYING:
45 – 60 min depending on applying conditions
Files
Technical data sheet
https://chromodomi.gr/wp-content/uploads/2025/05/MONOSMOKE-TDS-EN.pdf
Application Tools
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply the product with brush, roll or spray gun and let it dry for 20 – 40 min.
Apply the top coat.
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
