Top quality 100% acrylic water based beehive paint. It is friendly to the colony, environment and the user. Provide excellent glossy surface and resistance to yellowing, while at the same time it is scentless at the application because his very low content in volatile organic compounds (VOC). It applies to any kind of old and new beehives.
, 
, 
BEELAC
water based beehive paint)
Packaging:
750ml, 2.5Lt
Finish:
Satin
Shades:
Available in White, Poppy red, Light blue, Dark blue, Light green, Dark green, Light yellow, Dark yellow, Teal
https://chromodomi.gr/wp-content/uploads/2025/05/Βασικών-Bee-Lac.pdf
Technical Information
DILUTION:
If it’s necessary dilute with water.
COVERAGE:
12-15m2 / Lt on properly prepared surfaces
DRYING:
1 – 2 hours depending on applying conditions
Files
Technical data sheet
Application Tools
, 
, 
SURFACE PREPARATION
To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
Apply on surface the recommended undercoat of product (Velatura water)
Stir well the product and apply on surface
The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
During working keep tools “liquid” in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.
